Extemporaneous Project: Ingress Art
posted on 20 Nov 2012 | pictures
Making some original #ingress art
Started out with some fairly rough sand paper.
Fine grit sandpaper and a pane of glass for a shiny finish.
Sanded the heat spreader down to copper.
See where I'm going with this?
Drew the desired pattern on the processor with a wax crayon.
Warning: electroplating with lead solder is probably a really bad idea.
The wax didn't stop the plating well enough, so I made the design stand out with a bit of sanding.
comments powered by Disqus